You are here: Home > Products > Furnace Accessories > K-1, K-2 & K-3

102.jpg (3709 bytes)  Heating Element Holders Type K-1, K-2 & K3

K-Series Element HolderGENERAL INFORMATION
 Type K Heating Element Holders are made of high density alumina ceramics and corrosion resistant hardware. They are used to secure and support the terminals of Molybdenum Disilicide Heating Element Type MOSI2. They are used where alternate steps for supplying insulation between the element shanks is used, such as when the elements are installed from the inside of a furnace chamber.

Type K-1 Heating Element Holders are used to secure and support both terminals of  3/6mm MOSI2 Heating Elements.

Type K-2 Heating Element Holders are used to secure and support a single terminal of either 6/12mm or 9/18mm MOSI2 Heating Elements.

Type K-3 Heating Element Holders are used to secure and support both terminals of either 6/12mm or 9/18mm MOSI2 Heating Elements.

CHARACTERISTICS & PROPERTIES

Type K

TYPE K-1

TYPE K-2 TYPE K-3

Use with element terminal diameter of, mm

 6 12 or 18 12 or 18

Terminal Spacing, mm (in.)

 25 (1.0) 50 (1.97) or 60 (2.3) 50 (1.97) or 60 (2.3)

SUGGESTED APPLICATION

Holder for MOSI2 Heating Elements

AVAILABILITY

Element holders are available on request.

Please contact us with your special requirements. We are pleased to contact you if you would like more information or want to discuss custom product availability and pricing.

To Order

Element Holders:  specify quantity, product type and description (by supplying written descriptions or materials specifications).

Copyright © 2007  ZIRCAR Ceramics, Inc.