ZIRCAR Ceramics’ Stacked Blanket Kiln Lids

ZIRCAR Ceramics owns and operates nearly 2 dozen kilns. Several are small top loading kilns that are fired to 1300C. By replacing the original IFB lined lids with a stacked blanket (ZIRCAR’s Alumina Type NMB) we have extended the life of the lid significantly, made the kiln more energy efficient and with the simple lift system, made it much easier [...]

By |2019-08-29T15:29:07+00:00August 30, 2019|General ZCI|Comments Off on ZIRCAR Ceramics’ Stacked Blanket Kiln Lids

ZIRCAR Ceramics’ Furnace Insulation Modules Type FIM

Our “FIM” Furnace Insulation Modules are pre-assembled engineered packages of a multi-layer ZIRCAR Ceramics Insulation system. These two FIMs have a board lining that consists of our alumina SALI as hot face, ZAL-15 as the intermediate layer and ECO-1200B as the backup layer. FRA -600 is the outer hardboard layer. The insulation system and the painted mild steel frame are [...]

By |2021-03-08T12:49:19+00:00June 28, 2019|General ZCI|Comments Off on ZIRCAR Ceramics’ Furnace Insulation Modules Type FIM

WOW, you can really hang your hat on our new Alumina Adhesive AL-CEM/DB1!

Our new AL-CEM/DB-1 is one strong Al2O3 adhesive.  After receiving so many customer requests for a high temperature Al2O3 cement that would “bite” to many different materials, ZIRCAR Ceramics has responded and is now offering its new Alumina Adhesive Type AL-CEM/DB-1. DB-1, as we refer to it, is an easy to use, air-setting adhesive that cures to very [...]

By |2021-03-08T13:23:19+00:00June 26, 2019|General ZCI, New Product|Comments Off on WOW, you can really hang your hat on our new Alumina Adhesive AL-CEM/DB1!

ZIRCAR Ceramics Now Designs With Inventor!

So many of our customers would send us 3D files, such as Solid Works, when submitting request for quotations. For years we would ask them if they would either convert them to a AutoCad 2000i or dimensioned PDFs. We have recently upgraded our design/drafting software to AutoDesk Inventor and now welcome your 3D files. Click the photo or link below [...]

By |2021-03-08T13:28:53+00:00June 14, 2019|General ZCI|Comments Off on ZIRCAR Ceramics Now Designs With Inventor!

ZIRCAR Ceramics’ Thermal Processing Storefront

Hello everyone. This is my very first entry into ZIRCAR’s blog. Please bear with me. I just wanted to share our listing that appears on the Thermal Processing Storefront. Here is a brief look at what you can read when you hit the link below. See the whole page here!  Stay tuned for more. Thanks for reading! David Hamling Vice [...]

By |2021-03-08T13:32:20+00:00May 31, 2019|General ZCI|Comments Off on ZIRCAR Ceramics’ Thermal Processing Storefront

Title

Go to Top